- ページ 10

暖房システム Airflow 90001461のPDF インストレーション、オペレーション、メンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。Airflow 90001461 19 ページ。

80001028 – Issue 1 10/21

4.0 Installation

Section 4 contains information about the installation of the product into its intended area of

operation. It contains information about the installation location, mobility, electrical

connection, and unboxing.

The product will come in a wooden structure and packaged which can be disposed of and

recycled. Ensure this manual is kept with the unit. The unit will not come upright, and it is

not recommended the product is unboxed this way in case it may fall. Move the box to the

intended location of install using a suitable means using a forklift, crane, or pallet truck. If for

any reason, the box is damaged and preventing transport, consult section 1.2, 1.5 and 1.7 of

this document.

The Purigo T air purifiers must be placed in a vertical position in such a way that the air

inlets and air outlets of the apparatus are not blocked by obstacles and a clear air

distribution path is guaranteed. The unit is intended to be stood on its feet. Do not seal the

unit in place. Do not put the unit in a location which will exceed its maximum temperature

tolerances. Do not place the unit in areas which are to be kept clear for any reason, such as

a fire exit. Allow easy access for adjustment of the potentiometer. Do not place the unit

inside a cupboard, wardrobe, or cabinet. Do not rest heavy objects on the unit or use it to

hold other objects in place. It is recommended to not place the unit where there is a danger

of it falling from a great height. Do not place the unit in water or submerge it. Do not concrete

the unit in place or install into a wall, floor, or ceiling.

Warning:

truck or crane. Ensure symmetrical load distribution and lift the device

slowly. Always keep a close monitor on the package and do not stand

underneath it. Do not attempt to operate this machinery and move the unit

unless properly licensed.

Warning:

from the forklift! Before transporting the unit, please ensure the forks of the

forklift truck are long enough to lift more than the entire underside of the

unit! (See figure 2) refer to table 1. Section 1. Risk of personal injury and

equipment damage due to an unpredictable center of gravity. If the package

is fitted incorrectly, incorrect weight distribution means they can be

dropped easily. Falling or overturned packages can cause damage or injury!

Figure 2: Make sure the length of the forks is sufficient to reach the end of the package

Due to load the package must be transported by forklift, pallet

Risk of personal injury and equipment damage due to falling