- ページ 12

ヒーター Decofire DF102043のPDF 組立・安全・操作説明書をオンラインで閲覧またはダウンロードできます。Decofire DF102043 17 ページ。 Rapid reduction area heater
Decofire DF102043 にも：組立・安全・操作説明書 (17 ページ)

ページを印刷する

Operation

WARNING: If the lighting instructions are not followed directly a fire or explosion may occur

resulting in property damage, personal injury or death.

• The glass flame tube may break if it is wet while in use; never use the appliance while it's raining or wet

conditions are present. Do not splash any liquid on the appliance while it is operating or hot.

• Keep children away from the unit while in use; the glass tube may be extremely hot while in use.

• Do not touch the guard while the appliance is operating or hot.

• Ensure that the heater is on a firm and level surface. The heater may be damaged if the unit tips over.

• Never use the heater if the glass tube shows any cracks.

To Light

1. Unscrew the ignition button on the burner to see if the battery has already been placed inside. If the battery is not

already within the ignition button on the burner, please place the battery into the ignition button slot.

2. Make sure the ignition control knob is turned to the 'OFF' position. Connect gas cylinder and slowly open the valve

on the gas cylinder by turning the knob counterclockwise.

3. Press in and turn the ignition control knob to the "pilot" position; hold down for 1 minute.

4. Push the ignition button, while still holding down control knob down, to generate a spark.

5. Check to see if pilot is alight through the glass tube. If there is, turn the control knob to the "low" position.

6. For maximum flame height and heat output, turn the control knob to the "high" position.

To Extinguish

1. Push and turn the ignition control knob clockwise to the 'OFF' position.

2. Turn the valve on the gas cylinder to close the gas supply and disconnect the gas cylinder.

Page 12

Operation

Observe flame height when lit.

The flame should be a yellow/blue

colour between 50 - 70cm in height.