- ページ 2
クックトップ KitchenAid KECD807XBL01のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。KitchenAid KECD807XBL01 20 ページ。 30" (76.2 cm) and 36" (91.4 cm) electric downdraft cooktop
KitchenAid KECD807XBL01 にも： 取付説明書 (20 ページ)
ページを印刷する
COOKTOP SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow
instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed
•
Tape measure
•
Flat-blade screwdriver
•
Phillips head screwdriver
•
Drill
•
Level
•
6" socket extension
•
Marker or pencil
•
Pliers
•
1_,,
drill bit
•
Jigsaw
•
Ratchet with 3/8"socket
Parts supplied
•
Vent grille
•
Pre-filter
Parts needed
•
A ULlisted
or CSA approved strainrelieffor
%"(2.2 cm)
knockout.
•
A UL listed or CSA approved conduit connector for
V2" (1.3 cm) trade-size metal-clad conduit
•
UL listed wire connectors
Metal ducting
Wall cap
6" (15.2 cm) Round Surface Wall Cap Damper
Order Part Number A406
5" (12.7 cm) Round Surface Wall Cap Damper
Order Part Number A405
3W' x 10" (8.3 x 25.4 cm) Surface Wall Cap Damper
Order Part Number A403
To order, see the "Assistance
or Service" section of the Use
and Care Guide.
•
Vent clamps
Check local codes. Check existing electrical supply. See
"Electrical Requirements"
section.
It is recommended
that all electrical connections
be made by a
licensed, qualified electrical installer.
2