- ページ 6

ペイントスプレー Green Gorilla ProLineのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Green Gorilla ProLine 20 ページ。 Industrial system

Wand & Tip Assembly

Wand Handle Styles

Your system can be con gured with one of three di erent wand types, Figure 3

below identi es each wand style. To complete the wand extension and tip

assembly you will need a 13/16" and 9/16" open end wrench. Note: Some systems

are pre-assembled, and require no additional assembly.

Pro31

PS30

AC70

g. 3

Pro31: The Pro31 wand handle incorporates a shuto valve at the handle and is

typically equipped with an 8" curved end extension for the 1.5 gallon tank size

and the 18" curved end extension for the 2.5 gallon tank This wand incorporates

a strainer at the end of the wand extension as outlined in Figure 18 and requires

periodic maintenance to clean the lter/strainer. Figures 4 & 5 and Figures 7-11

detail the assembly process of the extension and tank hose.

PS30: The PS30 wand is a drip-less style wand with a positive shuto valve at the

tip. The shuto is controlled by a solid rod that runs down the length of the wand

extension. The wand extension is assembled at the factory and tested. The 1.5

gallon tank size typically comes with an 8" wand extension and the 2.5 gallon tank

size with an 18" wand extension. Figures 21 - 25 detail the assembly steps for the

tip.

AC70: TheAC70 is an all poly trigger valve style wand and can be equipped with

many di erent straight extension lengths. This wand commonly comes with the

15" straight wand extension. Figure 6 details the wand extension assembly.

Pg. 5