- ページ 9
ホブ IKEA FRAMTID HGC4TのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。IKEA FRAMTID HGC4T 48 ページ。 Hob
IKEA FRAMTID HGC4T にも： 取扱説明書 (20 ページ)
ページを印刷する
ENGLISH
Technical data
Rating Plate
Made in Germany
© Inter IKEA Systems B.V. 1999
901.560.49
21552
PQM
The graphic above represents rating plate of
the appliance (without serial number which is
generated dynamically during the production
process), which is located at its underneath
surface of the casing.
Installation
Manufacturer is not responsible for any injury
to persons and pets or damage to property
caused by failure to comply following require-
ments.
Caution! To proceed with the installation
refer to the assembly instructions.
Warning! Installation process must follow
the laws, ordinances, directives and
standards (electrical safety rules and
regulations, proper recycling in accordance
with the regulations, etc.) in force in the country
of use!
Warning! The appliance must be
earthed!
Warning! Risk of injury from electrical
current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of volt-
age.
Model FRAMTID HGC4T Typ 55HAD64AO 6.5kW
PNC 949 593 108 S NO ...................... 220V-240V AC 50 Hz
Dear Customer, please apply here aside the
sticker you can find in the dedicate plastic bag
inserted inside the hob packaging. This will al-
low us to assist you better, by identifying pre-
cisely your hob, in case you will need in future
our assistance. Thank you for your help!
• Loose and inappropriate plug and socket
connections can make the terminal over-
heat.
• Have the clamping connections correctly in-
stalled.
• Use strain relief clamp on cable.
• Follow the connection diagram (it is located
on the underneath surface of the casting of
the hob).
Important! You must observe the minimum
distances to other appliances and furniture
cabinets or other units according to Assembly
Instruction.
If there is no oven beneath the hob insert a di-
viding panel at a minimum distance of 20 mm
from the bottom of the hob.
9
230 V
DGT