- ページ 12
ベビー＆幼児用家具 Britax HP4050A-020133 SeriesのPDF 取付・使用説明書をオンラインで閲覧またはダウンロードできます。Britax HP4050A-020133 Series 17 ページ。 Child booster seat
ページを印刷する
HOW TO USE
E. Hook the SecureGuard™ Device over the lap part of the seatbelt with the lap belt
positing logo facing forward. The SecureGuard™ Device must be used at all times
to prevent the child slumping (sliding forward at base of seat) as the lap belt on the
abdomen is dangerous in the event of a crash.
IMPORTANT: ALWAYS USE THE SECUREGUARD™ DEVICE .
F. Tighten the lap belt and the sash
belt if using an Inertia reel retractor
seatbelt, adjust lap portion of the
seatbelt firmly around the child and
child booster seat, place the sash
over the top of the seat where the
BOOSTER SEATBELT PATH
red
label is. Then let the slack sash portion
retract up into sash retractor.
22
Instructions for Installation & Use - Series No. HP4050A-020133
BOOSTER
SEATBELT PATH
label
Sash belt
across the
chest and
through the
sash guide
Lap belt must
always be firm
on the thighs.
BOOSTER
SEATBELT
PATH
label
Engage buckle
G. The seatbelt must fit firmly but comfortably across the lap and chest. If needed,
adjust the vehicle seat to improve the position of the sash on the child's chest. It
should pull to the rear of the child.
H. Always ensure the lap belt is on the child's hips and thighs at all times. The lap belt
must not be on the child's abdomen. The sash belt must be across the child's chest.
IMPORTANT:
Always ensure the seatbelt is firmly fitted to the hips and thighs and the sash belt is
always fitted diagonally across the chest.
The SecureGuard™ Device correctly adjusted must always be used when the child is
using the booster seat as it ensures the lap belt is correctly positioned on the child's
thighs and hips. A loose or poorly positioned lap belt can allow the lap belt to ride up into
the abdomen and can cause serious injuries in a crash.
:
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR
Instructions for Installation & Use - Series No. HP4050A-020133
HOW TO USE
23