- ページ 4

ランタン Green Lighting TRI-SENSOR GL4612LUのPDF 組立・取付説明書をオンラインで閲覧またはダウンロードできます。Green Lighting TRI-SENSOR GL4612LU 6 ページ。

INSTALLATION - continued

2. Use the junction box as a template

and mark the positions for the two

deep and insert masonry plugs so they

3. Pierce a hole in the grommet and

push the mains cable through allowing

enough cable for connection to the

terminal block (FIGURE 2).

4. Push the hex screws through the

back of the junction box so they

protrude inside the box (FIGURE 2).

Fix the junction box to the mounting

(FIGURE 2).

FIGURE 3

6. Connect the mains supply cable to the terminal block using the following

colour code for the wiring (FIGURE 3):

Connect the wire coloured Brown or Red (Live) to the corresponding Brown

wire in the terminal block, or the terminal marked L.

Connect the wire coloured Green/Yellow or Green (Earth) to the corresponding

Green/Yellow wire in the terminal block, or the terminal marked E or

Connect the wire coloured Blue or Black (Neutral) to the corresponding

Blue wire in the terminal block, or the terminal marked N.

Clip the terminal block on the junction box.

REMEMBER: THIS FITTING MUST BE EARTHED.

(FIGURE 2).

P-LUX UNIT

FIGURE 2

2 X2