- ページ 3

フラッドライト Gantom Precision DMXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Gantom Precision DMX 6 ページ。 Dmx light

ADDRESSING YOUR PRECISION DMX

Due to its compact size, the Precision DMX cannot use a physical DIP switch for addressing. Instead, the

Precision DMX is programmed using the DMX Programmer App by Gantom. In addition to setting the

DMX starting address for the fixture, the app allows you to save a default color, brightness, and special

effect for the fixture if the application does not require any DMX control.

By default, the DMX starting address will be 1. The Precision DMX will flash several times when it is

powered on to indicate its starting address. If the Precision DMX is assigned to address 245 it will report

its address by flashing red 2 times, then flashing green 4 times, then flashing blue 5 times. If it is

assigned to DMX address 038, it will flash red 0 times, then flash green 3 times, then flash blue 8 times.

Address reporting at startup can be toggled off in the settings menu covered later in this document.

What you need:

o An Android or iOS device for running the Gantom Programmer app. Please note that a

headphone port is required to connect to the device to the fixture. The iPhone7 does work

with, but you will need to use the headphone port adapter that is included with the phone.

o A male-to-male 3.5mm audio cable. This is the same type of cable that you would use to

connect your Android or iOS device to headphones or to an AUX port.

o Power supply for the fixture. All Gantom fixtures accept 12v DC power. We recommend using

one of our PowerPak Mini units if you are just going to power a single fixture.

o The free DMX Programmer app by Gantom. This can be found by searching "Gantom" in iTunes

for an Apple device or Google Play for an Android device

First, open the DMX Programmer app by Gantom. The app will open to

the screen you see here. From this screen, select the Precision DMX.

The app will then provide you instructions on how to connect the light

fixture to the tablet or smartphone. Please note the order in which the

cables should be connected. First connect the headphone cable to the

light fixture and to the tablet/smartphone. Next, connect the power to

the fixture. When prompted by the app, tap the "Next" button and you

will be taken to the control screen.

Precision DMX User Guide

Version 1.0 – 6/2/2017