- ページ 9

防犯カメラ HIKVISION H1T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION H1T Series 17 ページ。 Turbo hd dome camera
HIKVISION H1T Series にも：ユーザーマニュアル (14 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (14 ページ), ユーザーマニュアル (14 ページ)

9. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0°to75°]

1). Hold the camera body and rotate the enclosure

to adjust the pan position [0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.3 Installation of Type I and Type II Camera

2.3.1 Ceiling/Wall Mounting with Junction Box

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole (optional) in the

ceiling/wall according to the holes of the drill

template.

Figure 2-15 Drill Template of the Junction Box

Note:

Drill the cable hole, when adopting the ceiling

outlet to route the cable.

3. Take apart the junction box, and align the screw

holes of the turret camera's mounting base with

those on junction box's cover.

4. Fix the mounting base on junction box's cover by

supplied screws.

Figure 2-14 3-axis Adjustment

Pan Position

[0° to 360°]

Rotation Position

[0° to 360°]