- ページ 7
防犯カメラ Ganz C-AllView TiのPDF インストーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Ganz C-AllView Ti 20 ページ。
ページを印刷する
To offset the camera head
When mounting upright, the camera head
can be offset to allow it a field of view
clear of the pan motor section of the hous-
ing.
1 Unscrew and withdraw the M5 socket
head retaining bolt from the middle of
the front of the yoke.
2 Carefully tip the yoke assembly forward.
3 Re-insert the bolt from the rear of the
yoke and tighten to approximately
0.97Kg/m. Do not over tighten the bolt.