- ページ 11

モニター deconta aircontrol S SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。deconta aircontrol S Series 20 ページ。 Negative pressure monitor 110v

Device status

Dynanometer(1 – 8)

Measuring value

After switching on the aircontrol there are 3 information displayed in the top line:

 Top left => device status

Possible status indications (S followed by 3 numbers):

First digit 1 to 8

Second digit 1

Second digit 2

Second digit 3

Third digit 1

 Top middle => Actual time

 Top right => Alarm status

Possible alarm status indications:

A100

Alarm evaluation deactivated

A101

Alarm evaluation is activated, no alarm has been identified

A102

Alarm low identified, the delay time is running

103

Alarm high identified, the delay time is running

A104

External alarm identified, the delay time is running

A112

Alarm low identified, the delay time has expired

A113

Alarm high identified, the delay time has expired

A114

External alarm identified, the delay time has expired.

Underneath the top line, the dynamometer is displayed with the actual measured

negative pressure values.

Instruction manual

aircontrol S 110V

8 Display-indication

Time

Number of the present measuring channels

Optional printer present

Optional memory module present

Printer and memory modules present

Optional communication module present

Indication for inserted

options (e.g. battery)

Alarm status

page 11