- ページ 18

換気フード IKEA FINSMAKAREのPDF マニュアルをオンラインで閲覧またはダウンロードできます。IKEA FINSMAKARE 44 ページ。
IKEA FINSMAKARE にも：マニュアル (44 ページ), ユーザーマニュアル (20 ページ), マニュアル (36 ページ), マニュアル (33 ページ), マニュアル (12 ページ), マニュアル (25 ページ), マニュアル (40 ページ), マニュアル (32 ページ), マニュアル (40 ページ), マニュアル (17 ページ)

ページを印刷する

1. Installation

ENGLISH

A signal sounds when the tank is full.

If you put too much water into

the tank, the safety outlet moves

the excess water to the bottom of

the oven.

Remove the water with a sponge

or cloth.

Emptying the water tank

Caution! Make sure that the

oven is cool before you start to

empty the water tank.

1. Prepare the draining pipe (C), included

in the same package with the user

manual. Put the connector (B) onto one

of the ends of the draining pipe.

2. Put the second end of the draining pipe

position than the outlet valve (A).

3. Open the oven door and put the

connector (B) into the outlet valve (A).

4. Push the connector again and again

when you empty the water tank.

The tank can have some

water when the display

shows: Water required.

Wait until the water flow from

the water outlet valve stops.

5. Remove the connector from the valve

when the water stops flowing.

Do not use the drained water to

fill the water tank again.

Heat-up indicator

When you turn on a heating function, the

bar on the display comes on. The bar shows

that the temperature increases. When

temperature is reached the buzzer sounds 3

times and the bar flashes and then

disappears.

Fast Heat Up

This function decreases the heat-up time.

Do not put food in the oven when

the Fast heat up function works.

To turn on the function, hold

seconds. The heat-up indicator alternates.

This function is not available for some oven

functions.

Residual heat

When you turn off the oven, the display

shows the residual heat. You can use the

heat to keep the food warm.

for 3