- ページ 2
防犯カメラ Ganz ST135-90-CB55H-CK-18IR-AC3のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ganz ST135-90-CB55H-CK-18IR-AC3 4 ページ。 Colour vandal dome camera
CONNECTIONS AND CAMERA SETTINGS
■ LENS ADJUSTMENTS
1. Adjust the panning(360˚) and tilt(70˚) position.
2. Setting the zoom position by using Zoom Lever Screw.
3. Setting the focus by using Focus Lever Screw.
■ CAMERA SETTINGS for CB55H-Interface board
● DIP SWITCH FUNCTION
(1) Compensating for backlight
ON
When back light is so bright
OFF
Normal setting
CAUTION
: It will be correctly set by adjusting DC Lens control.
(3) Confirming the White Balance
AWC
Ues this under light source below 2500K and over 9500K of natrium.
Use this under lightsource between 2500K and 9500K of flourescent
ATW
lamp ,incandescent light
(1) BLC
(2) ME/AE
(3) AWB
(4) AGC
(5) DC Iris volume
(6) 2nd Video out
(2) Confirming the iris setting
ME
The default setting when DC auto-iris lens is installed
AE
The default setting when fixed iris lens is installed
CAUTION
: The iris setting is preadjusted as the best condition for
use at time of factory shipment, so it isn't necessary to change settings
(4)Setting gain control (AGC)
For adjusting the sensitivity of the camera. Use this setting for shooting
in dark environments.
ON
Normal setting
OFF
Set this when there is excessive noise