- ページ 9

防犯カメラ HIKVISION HWT-T220-PのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION HWT-T220-P 17 ページ。 Hd turret and bullet camera

Figure 2-8 Attach the Mounting Base to the Ceiling

Note:

The supplied screw package contains



self-tapping screws, and expansion bolts.

For cement ceiling, expansion bolts are required



to fix the camera. For wooden ceiling,

self-tapping screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Combine the camera body with the mounting base.

1). Put the camera body in the mounting base.

2). Align the notch to the clip plate, and rotate the

enclosure a little bit.

3). Tighten the screw to secure the camera on the

mounting base.

Figure 2-9 Secure the Camera with Mounting Base

7. Connect the corresponding cables, such as power

cord, and video cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Tilt Position

[0° to 75°]

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the camera body to adjust the rotation

position [0° to 360°].

2.3 Installation of Type IV Camera

Pan Position

[0° to 360°]

Figure 2-10 3-axis Adjustment

Rotation Position

[0° to 360°]