- ページ 10
換気フード IKEA IHW7302YS0のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。IKEA IHW7302YS0 44 ページ。 30"(76.2cm) wall-mount canopy range hood
ページを印刷する7. Place theassembled airdeflector andductover t heexhaust
outlet f rom thehood.
8. Reassemble
theairdeflector totheductcover b racket with
2 assembly screws.
9. Seal connections
withvent c lamps.
Mc,, <®Eecffc<x Connect on
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Disconnect
power.
2. Remove terminal box cover.
3. Remove the knockout in the terminal box and install a UL
listed or CSA approved 1/2"strain relief.
4. Run home power supply wiring through 1/2"strain relief into
terminal box.
6. Use UL listed wire connectors
and connect black wires (C)
together.
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal
box.
Failure to do so can result
in death or electrical
shock.
7. Connect green (or bare) ground wire from home power supply
to the 2 yellow-green
ground wires (D) in terminal box using
UL listed wire connectors.
8. Tighten strain relief screw.
9. Install terminal box cover.
10. Reconnect power.
1=
When using both upper and lower vent covers, push lower
cover down onto hood and lift upper cover to ceiling and
install with two 2.9 x 6.5 mm screws.
NOTE: For vented installations, the upper vent cover may be
reversed to hide slots.
5=
A. UL fisted wire connectors
B. White wires
C. Black wires
D. Green (or bare) wire connected
to
yellow-green
wires
E. Home power supply
Use UL listed wire connectors
and connect white wires (B)
together.
B
A. Upper vent cover
B. Lower vent cover
C. 2.9 x 6.5 mm screws
D. Bracket
10