- ページ 7

防犯カメラ Ganz ZC-D7000 SERIESのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ganz ZC-D7000 SERIES 8 ページ。

Adjusting the line phase

Use an AC power-source synchronization phase

adjustment volume to adjust the phase of power

synchronization (The default position is where the

adjuster is fully turned to the left).

When using the line lock function, the

line frequency should be as follows:

NTSC—60Hz, PAL—50Hz

Adjusting the DC iris level

Adjust the DC iris level to suit the environment in which you are using the

unit. (The default position for the adjuster is in the center.)

Adjusting the camera direction

The camera body is set in a tri-axial mounting allowing movement in the pan, tilt,

and rotational planes. Adjust the direction of the lens so it faces the subject.

Indicates the top of the camera

Using the camera in a near-horizontal position will show the camera

cover on screen.

Do not rotate it more than once. The wiring cables within the camera

may be twisted and broken, damaging the camera.

DC iris adjustment

volume

Line phase

adjustment volume

360º Pan

360º Rotation

180º Tilt

EG-7

Adjusting the view angle and focus

Move the lever to adjust focus and angle of view.

Installation and adjustment complete

Attach the inner cover.

After aligning the inner cover as

shown in the right ﬁ gure, push it until

you hear a click.

Attach the dome cover to the

dome base.

After aligning the groove between

the dome cover and the dome base,

push the cover until you hear a click.

View angle

adjustment lever

Focus adjustment

lever