- ページ 4

防犯カメラ Ganz ZC-DN3048PHAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ganz ZC-DN3048PHA 8 ページ。 Zc-dn3000 series mini dome camera

INSTALLATION & ADJUSTMENT

Creating a Hole in the Ceiling or Wall

Make two holes for the screws affixing the camera body, and one hole for the

power and video cables.

* Use the supplied template to mark the appropriate mounting position on

the ceiling or the wall.

Mounting the Camera Body

Remove the body cover, and mount the

camera body to the ceiling or wall.

Align the housing to the holes you have

made, and use two screws to mount the

camera body.

* Choose screws suitable for the type of ceil-

ing or wall material. Screws with a diam-

eter of 4 to 5 mm is recommended.

Page 4

(EG)D3048/563PAL

• Running cable along

the ceiling or wall

surface

(Back of camera body)

Press open the perforated

section, and run the cables

through.

Wall

① Check if the power is off before handling the power cable.

② When using DC power, check for proper polarity before connecting to power sup-

ply. Improper polarity may cause damage to the camera.

EG-4

Connecting the Cables

Please refer to the diagrams below.

① Connect the video cable from monitor to the equipped video cable.

* When not using the equipped video cable, con-

nect the video cable from monitor to the camera

as shown.

② Connect the power cable.

* When using 12V DC, connect the positive (+) side to the side marked "DC

12V."

• When using 12V DC.

• When using 24V AC.

ATTENTION

03.10.6, 3:36 PM

Adobe PageMaker 6.5J/PPC