- ページ 17

クックトップ KitchenAid W11179813AのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。KitchenAid W11179813A 18 ページ。

ページを印刷する

Use the following chart to find the exact orifice spud

placement.

Natural Gas Orifice Spud/Hood Chart

Burner

Stamp

Size

Rating

5,000 BTUs

0.99 mm

15,000 BTUs 175

1.75 mm

20,000 BTUs 203

2.03 mm

0.78 mm

NOTE: Refer to serial tag for more information on burner ratings

and locations.

Burner orifice spud

A. Size stamp

B. Fuel type stamp (L for Propane or

N for Natural gas)

6. Place Propane gas orifice spuds in plastic parts bag for

future use and keep with package containing literature.

7. Replace the burner base and screws. Tighten screws only

until burner is snug to cooktop, do not over‑tighten.

8. Replace burner cap.

9. Repeat steps 2 through 8 for the remaining burners.

Adjusting Simmer Low Setting on Surface Burners

for Natural Gas

1. Unplug cooktop or disconnect power.

2. Using the square bit screwdriver, remove the surface burner

control knobs and bezels.

3. Remove the two screws on each side of the cooktop that

hold the control console in place.

Console attachment

screws (2 per side)

Do not remove

this screw

Burner Style

Small burner

Medium burner

Large burner – main

Large burner – simmer

4. Remove the console and set it aside.

5. Locate the appropriate low‑turndown screw for the

appropriate burner on the given valve. The low‑turndown

screw for the left rear, right rear, center rear, and center front

burner valves (aluminum) is located through the center of the

valve stem. The low‑turndown screw for the left front and

right front burner valves (brass) is located behind the ignition

switch on the valve body, left of the stem. To remove the

ignition switch cut the wire tie and pull the switch off the

valve stem.

A. Aluminum Valve for Left Rear, Right Rear,

Center Rear, and Center Front burners

B. Brass Valve for Left Front and Right Front

Dual burners

C. Wire Tie

D. Ignition switch

A. Low-turndown adjustment screw for

Aluminum Valve through center of stem

B. Low-turndown adjustment screw for Brass

Valve