ページを印刷する
ENGLISH
or section of wire between the cable anchor point and
the terminals must be arranged in such a way as to allow
the live wires to be pulled out before the earth wire in the
event of the cable coming out of its anchor.
• The manufacturer will not be liable for any damage
resulting from incorrect or inadequate installation.
• Check that the mains power supply corresponds to the
one indicated on the rating plate fixed to the inside of
the product.
• The cut-out devices must be installed in the fixed
system according to wiring system regulations.
• For class I appliances, check that the domestic power
supply guarantees an adequate earthing system.
• Connect the product to the mains using an omnipolar
switch.
• If the power cable is damaged, it must be replaced by
the manufacturer, by an authorised service centre or by
a qualified technician, to avoid any risk of danger.
WARNING: Remove the protective films before
installing the appliance.
• Only use the screws and other hardware elements
supplied with the appliance.
WARNING: Failure to install the screws or fixing
devices as described in these instructions may mean
there is a risk of electric shocks.
• Cleaning and maintenance must not be carried out by
children, unless they are under the supervision of an
adult.
• Children must be supervised to ensure that they do not
5