- ページ 7
防犯カメラ HIKVISION TURBO HD D0T PIR SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD D0T PIR Series 16 ページ。
ページを印刷する
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self tapping screws are required.
4.
Route the cables through the cable hole, or the side
opening;
5.
onnect the corresponding power cord, and video
cable;
6.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle; If
not, adjust the camera according to the figure below
to get an optimum angle;
Rotation Position
[0° to 360°]
1). Loosen the P screw to adjust the pan position [0°
to 360°\; Tighten the screw after completing the
adjustment;
2). Loosen the T screw to adjust the tilt position [0°
to 180°\; Tighten the screw after completing the
adjustment;
3). Loosen the R screw and rotate the camera [0° to
360°\; Tighten the screw after completing the
adjustment;
2.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box separately;
Steps:
1.
Paste the drill template on the ceiling/wall.
2.
Drill screw holes and the cable hole in the
ceiling/wall according to the holes of the drill
template.
Figure 2-4 Drill Template of Junction ox
3. Take apart the junction box, and align the screw
holes of the bullet camera with those on the
Junction box' cover.
4. Fix the camera on the junction box's cover with
supplied screws.
Available from A1 Security Cameras
w.a1securitycameras.com email: sales@a1securitycamera
-
Figure 2-3 3-axis !djustment
Pan Position
[0° to 360°]
P Screw
Tilt Position
[0° to 180°]
T Screw
R Screw