- ページ 5
防犯カメラ HIKVISION TURBO HD D7T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD D7T Series 10 ページ。
ページを印刷するRotation Position Range
[0°-355°]
6. Install the bubble to the camera and tighten three
screws.
Figure 2-5 Fix the Camera to the Ceiling
2.1.2 Ceiling Mounting with Inclined Base
Steps:
Attach the drill template (supplied) and then drill
7.
the screw holes and the cable hole in the ceiling.
8. Install the inclined base to the ceiling according to
the template and fix the screws to secure the base.
Figure 2-7 Fix the Inclined Base to the Ceiling
9. Repeat step 1-6 of 2.1.1 to install the camera to the
inclined base.
2.2 Wall Mounting with Bracket
You need to purchase a bracket/pendent cap separately if you
adopt wall mounting with bracket/pendent cap.
2.2.1 Wall Mounting with Plastic Bracket
Steps:
1. Attach the drill template (supplied) and then drill
the screw holes and the cable hole in the ceiling.
Figure 2-4 3-axis Adjustment
Hole
Figure 2-6 Disassemble the Camera
Pan Position Range
[0°-355°]
Tilt Adjusting Screw
Tilt Position Range
[0°-75°]
Ceiling Mounting
Hole