- ページ 11

食器洗い機 KitchenAid 8531048のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。KitchenAid 8531048 18 ページ。 Undercounter dishwasher

ページを印刷する

Canceling a Cycle

Anytime during a cycle, press

CANCEL/DRAIN glows. The dishwasher starts a 2-minute drain (if

needed). Let the dishwasher drain completely. The light goes off

when the dishwasher finishes the drain.

To stop the drain

You can press Cancel/Drain again to stop the drain immediately.

Remember to drain the dishwasher before starting a new cycle.

To clear the indicators

Press Cancel/Drain before starting the dishwasher to clear all

options and cycles.

Changing a Cycle or Setting

During the first minute of a cycle

Press a new cycle and/or options.

After the first minute of a cycle

1. Press

CANCEL/DRAIN glows. The dishwasher starts a 2-minute

drain (if needed). Let the dishwasher drain completely.

2. Check the detergent dispensers. If the main wash cup has

opened and the detergent washed away, refill the cups as

needed.

3. Close the door.

4. Press a new cycle and/or options.

5. Press START.

Adding Items During a Cycle

You can add an item anytime before the main wash starts. Open

the door and check the detergent dispenser. If the cover is still

closed, you can add items.

To add items

1. Lift up the door latch to stop the cycle. Wait for the spraying

action to stop before opening the door.

2. Open the door. If the detergent dispenser cover is still closed,

add the item.

3. Close the door firmly until it latches. The dishwasher resumes

the cycle after about a 5-second pause.

Option Selections

You can customize your cycles by pressing an option. If you

change your mind, press the option again to turn the option off.

Select a different option if desired.

You can change an option anytime before the selected option

begins. For example, you can press an unheated drying option

any time before drying begins.

Press START to repeat the same cycle and options as the

previous wash cycle.

NOTE: If the last cycle you completed was a rinse cycle, when

you press Start, the dishwasher runs the last full wash cycle and

options.

Hi-Temp Wash

Select this option to raise the water temperature in the main

wash, and add a rinse. The higher water temperature, and added

rinse, help clean tough soils.

This option adds heat, water and wash time to the cycle.

NOTE: Hi-Temp Wash is an option with the Heavy and Normal

cycles.

ENERGY SAVER™ Dry System

Select this option to dry dishes without heat and save energy.

ENERGY SAVER™ Dry System is useful when loads contain

plastic dinnerware that may be sensitive to high temperatures.

The dishes take longer to dry and some spotting can occur. For

best drying, use a liquid rinse aid. Some items (such as plastics)

may need towel drying.

NOTE: Rinse Only automatically uses this option. ENERGY

SAVER™ Dry System is an option with all other cycles.

Control Lock

Use Control Lock to prevent unintended use of your dishwasher.

You can also use the control lock feature to prevent unintended

cycle or option changes during a cycle.

When CONTROL LOCK is lit, all buttons are disabled.

NOTES:

The dishwasher door can be opened while the controls are

locked.

You can turn on the Lock while the dishwasher is running.