- ページ 8

防犯カメラ HIKVISION TURBO HD DS-2CE56C0T-IT3FのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56C0T-IT3F 10 ページ。 Tvi bullet & turret & dome

Figure 2. 4 Disassemble the Camera

2. Remove the mounting base from the camera body

with a flat object, e.g., a coin.

3. Attach the drill template (supplied) to the place

where you want to install the camera, and then drill

the screw holes and the cable hole (optional) on the

ceiling according to the drill template.

Note:

Cable hole is required when adopting the ceiling outlet

to route the cable.

4. Attach the mounting base to the ceiling and secure

them with supplied screws

Figure 2. 6 Attach the Mounting Base to the Ceiling

Note:

In the supplied screw package, both self-tapping



screws and expansion blots are contained.

If the wall is cement, expansion blots are required



to fix the camera. If the wall is wooden,

self-tapping screws are required.

5. Route the cables through the cable hole (optional),

or the side opening.

6. Align the camera with the mounting base, and

tighten the screws to secure the camera with the

mounting base.

Figure 2. 5 Drill Template