- ページ 7

防犯カメラ HIKVISION TURBO HD DS-2CE56C5T-IT3ZのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56C5T-IT3Z 16 ページ。 Dome & turret camera

2.2 Ceiling Mounting of Type II Camera

Before you start:

The installation steps of ceiling mounting and wall

mounting are similar, and the following takes ceiling

mounting as an example to describe the steps.

Steps:

1. Paste the drill template to the place where you want

to install the camera.

2. Drill the screw holes according to the drill template,

and the cable hole (optional) on the ceiling.

Note:

Drill the cable hole in the center of the drill template,

when adopting ceiling outlet to route the cable.

3. Loosen screws to remove the clip plate, and take out

the main body.

4. Install the mounting base to the ceiling with

supplied screws.

Figure 2-9 Install the Mounting Base to the Ceiling

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement wall/ceiling, expansion bolts are



required to install the camera. For wooden

wall/ceiling, self-tapping screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Install the main body to the mounting base and

insert the clip plate.

Figure 2-7 Drill Template

Figure 2-8 Remove the Clip Plate