- ページ 6

防犯カメラ HIKVISION TURBO HD DS-2CE56D(F)7T-IT3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56D(F)7T-IT3 11 ページ。 Turret camera

screw holes and the cable hole in the ceiling

according to the drill template.

4. Route the cables through the cable hole.

5. Secure the mounting base to the ceiling with the

supplied screws. (You can drill the expansion screws

first or drill the fixing screws directly)

Figure 2-8 Fix the Mounting Base to the Ceiling

6. Route the cables. Connect the power cord and

network cable.

7. Secure the camera to the mounting base.

8. Adjust the camera according to Figure 2-10 to get an

optimum angle.

1). Hold the camera body and rotate the enclosure

to adjust the pan angle [0° to 360°].

2). Move the camera body up and down to adjust

the tilt angle [0° to 75°].

3). Rotate the camera body to adjust the Loosen

No.3 adjusting azimuth angle [0° to 360°].

Tilt Position Range

[0°-75°]

2.2.2 Ceiling Mounting with Gang Box

You need to purchase a gang box separately if you adopt celling

mounting with gang box.

Figure 2-7 Drill Template

Expansion Screw

Fixing Screw

Figure 2-9 Secure the Camera

Pan Position Range

[0°-360°]

Figure 2-10 3-axis Adjustment

Rotation Position Range

[0°-360°]