- ページ 5

防犯カメラ HIKVISION TURBO HD DS-2CE56D8T-(A)VPIT3Z(E)のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56D8T-(A)VPIT3Z(E) 15 ページ。 D8t series dome camera

ページを印刷する
1.2.3 Overview of Type III Camera
Mounting
Base
Tilt Adjusting
Screw
Bubble
Figure 1-3 Overview of Type III Camera

2 Installation

Before you start:
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is
power-off during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid the damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
If the wall is cement, insert expansion bolts before
installing the camera. If the wall is wooden, use
self-tapping screws to secure the camera.
If the product does not function properly, contact
your dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance
by yourself.
2.1 Ceiling Mounting of Type I Camera and Type II
Camera
Before you start:
Both wall mounting and ceiling mounting are suitable
for the dome camera. Ceiling mounting will be taken as
an example in this section. And you can take steps of
ceiling mounting as a reference for wall mounting.
Steps:
1. Paste the drill template to the celling.
2. Drill screw holes and the cable hole (optional) on
the ceiling according to the supplied drill template.
Note:
Drill the cable hole when adopting the ceiling outlet
to route the cable.
Type I Camera
Video Cable TVI
IR LED
Photoresistor
Black Liner
Safty Rope
Type II Camera
Power Cord
12 VDC