- ページ 7
防犯カメラ HIKVISION TURBO HD DS-2CE56D8T-VPIT(E)のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TURBO HD DS-2CE56D8T-VPIT(E) 15 ページ。 D8t series dome camera
HIKVISION TURBO HD DS-2CE56D8T-VPIT(E) にも： ユーザーマニュアル (17 ページ)
ページを印刷する
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Loosen the set screws with a hex wrench (supplied)
to remove the bubble.
4. Fix the mounting base on the ceiling with supplied
screws.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and network cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle
Figure 2-5 Drill Template
Figure 2-6 Remove the Bubble
Figure 2-7 Fix the Mounting Base