- ページ 6

食器洗い機 KitchenAid BRIVA KIDS01EKのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。KitchenAid BRIVA KIDS01EK 20 ページ。 In-sink dishwasher

START-UP GUIDE

Before using your dishwasher, remove all packaging materials.

Read this entire Use and Care Guide. You will find important

safety information and useful operating tips.

1. Rinse aid is essential for good drying. Be sure to fill the

dispenser before you use your new dishwasher. Each filling

will last about 1 to 3 months depending on your usage. (See

"Rinse Aid Dispenser.")

2. Scrape large food soil and hard items (toothpicks or bones)

from dishes.

3. Check and clean drain assembly screens. (See "Cleaning.")

4. Insert the drain stopper and turn clockwise one-quarter turn

to close.

5. Properly load the dishwasher. (See "Dishwasher Loading.")

Load dishes with space in between so water will reach the

soiled surfaces. Make sure nothing prevents the spray arm(s)

from spinning freely.

6. Add detergent and check the rinse aid dispenser. Add rinse

aid if needed. (See "Dishwasher Use.")

7. If you do not have the hot water tank accessory, run hot water

at the sink until the water is hot. (See "Dishwasher

Performance Tips.") Turn off water.

8. Press the desired cycle and option selections on the top of

the dishwasher opening. Or press Start pad to repeat the

same cycle and options as the previous cycle. (See

"Dishwasher Use.")

9. Press the Start pad on the top of the dishwasher opening.

start

The lights on the control panel will flash once.

10. Push lid firmly closed. Turn lid knob to latch.

If the lid is opened during the cycle, the cycle will stop. Close

the lid firmly and the cycle will continue.

NOTE: If the dishwasher senses the drain stopper is not

closed properly, selected cycle is cancelled. Lid pops open

and Check Drain indicator is lit. Insert drain stopper again and

seal. Start cycle again.

11. The lid opens automatically at the end of the cycle.

NOTE: Do not place anything on the dishwasher lid when

running a cycle.