- ページ 4
配管製品 Decor Star BRG01-TOのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Decor Star BRG01-TO 4 ページ。 Single handle vessel sink faucet
ページを印刷するInstallation
A
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
D1
D1. Apply Teflon (TPFE) tape on the
shut off valves. Thread the tape in
counter-clockwise direction.
F
F. Remove aerator from the spout and
let the water run for about 1 minute and
check for leaks. Attach the aerator.
B
8
B. Place the new faucet through flange
(8) on the mounting surface. The faucet
hole should be 1 3/8" in diameter on the
mounting surface.
D2
Flexible water supply line
D2. Use a wrench to tighten the hoses,
please do not overtighten the connec-
tions.
4
C
15
13
14
16
C. From under the sink, install the black
rubber washer (13), metal washer (14)
and nuts (16) onto the mounting bolts
(15.) Tighten the nuts to secure the
faucet to the counter top.
E
E. Turn on the water supply to check for
leaks at all connections.
1. Handle
2. Screw
3. Temperature Indicator
4. Cap
5. Bonnet
6. Cartridge
7. Body
8. Flange
9. Aerator Washer
10. Aerator
11. Aerator Housing
12. O ring
13. Rubber Washer
14. Metal Washer
15. Mounting bolts
16. Nuts
17. Water Supply Hoses
BPC01T Rev. 4 09/2016