- ページ 9

防犯カメラ HIKVISION TurboHD H0T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION TurboHD H0T Series 17 ページ。 Turbo hd bullet & dome camera
HIKVISION TurboHD H0T Series にも：ユーザーマニュアル (17 ページ), ユーザーマニュアル (16 ページ), ユーザーマニュアル (13 ページ), ユーザーマニュアル (18 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (17 ページ)

Note:

Drill the cable hole in the center of the drill template,

when adopting ceiling outlet to route the cable.

4. Attach the mounting base to the ceiling and secure

it with supplied screws. For cement ceiling, you

need to mount the expansion bolts at first.

Figure 2-12 Attach the Mounting Base

5. Route cables through the cable hole or the side

opening.

6. Install the camera back to the mounting base and

secure it.

Figure 2-13 Install the Camera Back

7. Connect the corresponding power cord, and video

cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure

below.

Pan Position

[0° to 360°]

Tilt Position

[0° to 75°]

2.2.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

1. Paste the drill template on the place where you

want to install the camera.

2. Drill screw holes and the cable hole according to the

drill template.

Figure 2-11 Drill Template

Figure 2-14 3-Axis Adjustment

Rotation Position

[0° to 360°]