- ページ 10

防犯カメラ HIKVISION UD04829BのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION UD04829B 10 ページ。 Turbo hd tvi bullet & turret & dome camera

For cement wall, expansion bolts are required to fix



the camera. For wooden wall, self-tapping screws are

required.

5. Route the cables through the cable hole (optional), or

the side opening.

6. Align the camera with the back box/base plate, and

secure the camera with the back box/base plate.

Type III Camera

Figure 2. 11 Fix the Camera to the Ceiling

7. Connect the corresponding cables, such as power

cord, and video cable.

8. Power on the camera to check whether the image on

the monitor is gotten from the optimum angle. If not,

adjust the camera according to the figure below to get

an optimum angle.

Type III Camera

Tilt Position:

0° to 75°

Figure 2. 12 3-axis Adjustment

9. Fit the black liner back to the camera and tighten the

bubble of the dome camera to finish the installation.

Figure 2. 13 Finish the Installation

Pan Position:

0° to 355°

Rotation Position:

0° to 355°

Type IV Camera