- ページ 3

冷蔵庫 Avantco SCLM2-36のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantco SCLM2-36 8 ページ。 Commercial refrigerator and freezer

Temperature Controls

• Refrigerant LED - Compressor is on

• Fan LED - Fan is on

• Defrost LED - Defrost cycle is running

Functions

Adjusting the Temperature

Refrigerators are programmed to operate between 33 and 40 degrees Fahrenheit.

Freezers are programmed to operate between -10 and +10 degrees Fahrenheit.

To set the temperature you would like your unit to run at, follow these instructions:

• Hold "SET" for 1 sec. The display will flash the temperature that the refrigerator is currently set to

run at.

• Use the arrow buttons to adjust the temperature you want it to run at.

• Press "SET" again to save your settings

If the unit consistently runs 5 + degrees higher than your set temperature, service may be needed.

Note: All other control functions should be performed by a service technician.

Freezer Control

CAUTION

Setting the temperature control to the coldest setting may cause the evaporator coil to freeze and ice

up. This will eventually result in a warmer cabinet temperature.

NOTE

Temperature controls on the pizza prep refrigerators are located on the front of the units.

Temperature controls on the sandwich prep tables and undercounter refrigerators and freezers are

located on the back of the units.

User Manual

Refrigerator Control

Prg

mute

aux

Set

def

- 3 -

set