- ページ 10

メディア・コンバーター Ganz ZS1-4DB1のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Ganz ZS1-4DB1 18 ページ。 H.264 video encoder

PixelPro GXi Series

4.2.Inserting and ejecting a blade

4.2.1. Inserting a blade

*Remove a cover plate from the slot in which a blade will be mounted. This is done by

unfastening the screws with a screw driver on each side of the cover.

1. Insert the blade into the rack chassis. Make sure the blade is properly aligned with the

rail.

2. Push back the blade completely.

3. Tighten the screws by turning them clockwise.

1. Unlock the two screws on both sides of the blade.

2. Grasp the blade and pull it out as shown in the above image

3. Remove the blade from the rack chassis.

10-2013-A

Lock

Unlock

Lock

Unlock

Ejecting a blade

ZS1-4DB1 Installation Guide