ページを印刷する*Please note, inline housings are not equipped with pressure relief valves or other safety related
components. Please ensure your system has adequate protection for where housing is located. Do not
place between two ball valves or closed cylinders without adequate protection.
Operation
8. Operate the extraction system as normal with the fill/soak process (see manufacturer's recommended operating
procedures).
9. When it comes time for the solution to pass through the filter housing it will require Nitrogen or Argon assist (do
not use compressed air). Set the pressure on the nitrogen regulator to no more than 60psi.
10. Connect the nitrogen line to the top of the materials column and fill the head space with nitrogen.