- ページ 11

DVR HIKVISION DS-2CE71D8T-PIRLのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION DS-2CE71D8T-PIRL 15 ページ。 Turret camera
HIKVISION DS-2CE71D8T-PIRL にも：クイック・スタート・マニュアル (17 ページ), ユーザーマニュアル (15 ページ)

ページを印刷する

3.2 LANGUAGE

Supports English, and Chinese.

3.3 WHITE LIGHT

The embedded white light source can be worked as the

visible alarm.

In the WHITE LIGHT, you can set the mode as ALARM,

or OFF.

3.3.1 ALARM

In the ALARM mode, you can select the TRIGGER

MODE as DVR, or CAMERA.

DVR

Select the TRIGGER MODE as DVR. In this way, the

alarm signal is sent from the DVR, and the camera

works as the alarm detector in the process. Besides, the

alarm type only supported by the DVR can also triggers

the visible alarm in the camera.

CAMERA

Select the TRIGGER MODE as CAMERA, the embedded

PIR module sends the alarm signal to the visible alarm

in the camera, when PIR module detected the alarm

source.

3.3.2 OFF

Select OFF to give up this function

3.4 MAIN MENU

3.4.1 AE (AUTO EXPOSURE)

Auto Exposure describes the brightness-related

parameters, which can be adjusted by BRIGHTNESS,

EXPOSURE MODE, AGC, and SENSE UP.

Figure 3-3 AE

BRIGHTNESS

Brightness refers to the brightness of the image.

You can set the brightness value from 1 to 10 to darken

or brighten the image. The higher the value is, the

brighter the image is.

EXPOSURE MODE

You can set the EXPOSURE MODE as GLOBAL, BLC, and

WDR.

 GLOBAL

GLOBAL refers to the normal exposure mode which

adjusts lighting distribution, variations, and

non-standard processing.

 BLC (Backlight Compensation)

BLC (Backlight Compensation) compensates light to the

object in the front to make it clear, but this may cause

the over-exposure of the background where the light is

strong.

When BLC is selected as the exposure mode, the BLC

level can be adjusted from 0 to 8.

 WDR (Wide Dynamic Range)