- ページ 10

キッチン家電 Avantco 178UDD60HCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantco 178UDD60HC 19 ページ。 Beer dispensers
Avantco 178UDD60HC にも：ユーザーマニュアル (19 ページ), ユーザーマニュアル (19 ページ)

ページを印刷する

User Manual

Storage & Handling

Draft beer should be treated as a food product. In most instances draft beer is not pasteurized. It is

very important that you store and handle it properly. Follow these steps to ensure the highest quality,

safety, and consumer satisfaction.

- Draft beer should be immediately stored in a refrigerated cabinet.

- Draft beer products have a recommended shelf life. If you have questions regarding the shelf life

of any of your draft products, please consult with your supplying depot or respective brewery

representative.

- Kegs should be stored separately from food products. If your cooler is used to refrigerate draft

and food products, it is very important that the food not be stored near or on the kegs.

- Keg storage and dispensing areas should be kept clean to prevent any possibility of contaminating

your products.

Knockout CO

These is the recommended procedure for

installing a remote CO

1. Remove black knockout plug with pliers. (See images below for plug locations)

2. Use drill with 1/2" bit to bore a whole straight back through wall into compressor compartment.

3. Snake CO

line through hole, down and around, exiting behind rear caster underneath grill.

4. Seal hole around CO

*Depending on setup and amount of kegs, a CO

NOTE: In models UDD1 & UDD1S, the CO

to maintain complete mobility

CAUTION

tanks are potentially dangerous because of the pressure they contain. If you are unfamiliar with

their use or the use of a CO

before proceeding.

Installation

container in your Avantco unit.

line with silicone sealer to prevent cold air leakage.

tank (up to 5 lbs. in size) can be placed inside the cooler

regulator, seek information from your local distributor, or beverage man

Tools:

Pliers

Power Drill

Silicone Sealer

1/2" Drill Bit

manifold may be needed.

- 10 -