- ページ 10

食器洗い機 IKEA RENLIGのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。IKEA RENLIG 42 ページ。 Integrated dishwasher
IKEA RENLIG にも：オーナーズマニュアル (28 ページ), ユーザーマニュアル (18 ページ), マニュアル (32 ページ), 取扱説明書 (32 ページ), マニュアル (20 ページ)

OPTIONS

Use to avoid unintended use of your dishwasher. When Control Lock is lit, all buttons are disabled. The dishwasher

door can be opened while the controls are locked.

To turn on Control Lock:

Press and hold SANI RINSE for at least 3 seconds. The Control lock light glows. If you press any pad while your

dishwasher is locked, the light flashes 3 times.

To turn off Control Lock:

Press and hold SANI RINSE for at least 3 seconds. The Control Lock light turns off.

CONTROLS AND CYCLE STATUS

CONTROL

PURPOSE

Press to start or resume a wash cycle.

If the door is opened during a cycle or the power is interrupted, the Start/Resume button indicator light flashes.

Cycle will not resume until door is closed and START/RESUME is pressed.

NOTE: If Start/Resume button is located on top of door, push door firmly closed within 3 seconds of pressing

START/RESUME. If door is not closed within 3 seconds, Start/Resume button LED will flash, an audible tone will

be heard (on some top control models), and cycle will not start.

Press to cancel wash cycle.

Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let dishwasher drain completely. Press

and hold START/RESUME for 3 seconds.

To follow progress of

your dishwasher cycle.

NOTE: Indicators shown

are not available on all

models.

OPTION SELECTIONS

COMMENTS

The Complete indicator glows when a cycle is finished.

If you select the Sani Rinse option, when the cycle is finished, the "Sanitized" indicator

glows.

If your dishwasher did not properly sanitize your dishes, the light flashes at the end of

the cycle. This can happen if the cycle is interrupted, or water could not be heated to

required temperature.

The light goes off when you open and close door or press CANCEL.

CAN BE

SELECTED

WITH

WHAT IT DOES