ENGLISH
Information for test institutes
For all the necessary information for test
performance, send an email to:
Options
Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid and
detergent functions. They can also contain
other cleaning or rinsing agents.
This option deactivates the release of salt.
The salt indicator does not come on.
With the use of this option the programme
duration is prolonged to increase the
cleaning and drying results with the use of
multi-tablets.
You do not need to activate the Multitab
option every time you start a programme.
Once you have activated the option it will
remain active.
How to activate Multitab
Press at the same time
• The indicator
activated.
Settings
Programme selection mode and user
mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings can
be changed:
• The level of the water softener according
to the water hardness.
Heruntergeladen von
manualslib.de
and
.
comes on = option
Handbücher-Suchmachiene
Write down the product number (PNC) that
is on the rating plate.
• The indicator
deactivated.
What to do if you want to stop using multi-
tablets
Before you start to use detergent, salt and
rinse aid separately do the following
procedure.
1. Deactivate the Multitab option.
2. Set the highest level of the water
softener.
3. Make sure that the salt and rinse aid
containers are full.
4. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
5. When the programme is completed,
adjust the water softener according to
the water hardness in your area.
6. Adjust the released quantity of rinse aid.
• The activation or the deactivation of the
acoustic signal for end of programme.
• The activation or deactivation of the
rinse aid dispenser when you want to
use the Multitab option without rinse aid.
These settings will be saved until you
change them again.
9
goes off = option
ページを印刷する