- ページ 7

エンジン GAPOSA XQ40のPDF マニュアルをオンラインで閲覧またはダウンロードできます。GAPOSA XQ40 15 ページ。 Tubular motors with encoder electronic limits
GAPOSA XQ40 にも： 取扱説明書 (8 ページ), 使用方法 (4 ページ), 取扱説明書 (13 ページ), マニュアル (16 ページ)

ページを印刷する
GAPOSA XQ40 マニュアル
PROGRAMMING
PROGRAMMING TRANSMITTER
CAUTION: If more motors with receiver have to be installed, it is important to
power up only one motor at time during the first programming session,
in order to avoid any interferences with others.
Power up the motor to be
1
programmed.
Press and hold the PROG-TX
2
button until the motor starts
moving.
Check the rotation of the motor,
3
then release PROG-TX (the motor
stops).
Within 5 seconds press the
corresponding button (i.e. UP
if the motor rotates upwards
4
or DOWN if vice versa).
The transmitter has been
programmed and the rotation of
the motor has been synchronized.
1/4
OFF
ON