- ページ 4

電動工具 Makita 1923HのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 1923H 13 ページ。 Power planer
Makita 1923H にも：取扱説明書 (17 ページ), 取扱説明書 (18 ページ)

ページを印刷する

Be sure the blade installation bolts are

securely tightened before operation.

Hold the tool firmly with both hands.

Keep hands away from rotating parts.

10. Before using the tool on an actual workpiece,

let it run for a while. Watch for vibration or

wobbling that could indicate poor installation

or a poorly balanced blade.

11.

Make sure the blade is not contacting the

workpiece before the switch is turned on.

12. Wait until the blade attains full speed before

cutting.

13. Always switch off and wait for the blades to

come to a complete stop before any adjusting.

14. Never stick your finger into the chip chute.

Chute may jam when cutting damp wood.

Clean out chips with a stick.

15. Do not leave the tool running. Operate the tool

only when hand-held.

16. Always change both blades or covers on the

drum, otherwise the resulting imbalance will

cause vibration and shorten tool life.

17. Use only Makita blades specified in this

manual.

18. Always use the correct dust mask/respirator

for the material and application you are

working with.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product.

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before adjusting or checking function on

the tool.

Adjusting depth of cut

004879

Depth of cut may be adjusted by simply turning the knob

on the front of the tool.

Switch action

CAUTION:

Before plugging in the tool, always check to see

•

that the switch trigger actuates properly and returns

to the "OFF" position when released.

For tool without lock button and lock-off button

004881

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For tool with lock button

004884

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

For continuous operation, pull the switch trigger and then

push in the lock button.

1. Knob

1. Switch trigger

1. Lock button /

Lock-off button

2. Switch trigger