- ページ 3

電動工具 Makita 2012NBのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 2012NB 20 ページ。 Thicknesser
Makita 2012NB にも：取扱説明書 (13 ページ), 取扱説明書 (14 ページ), 取扱説明書 (13 ページ), 取扱説明書 (17 ページ)

ページを印刷する

17.

USE RECOMMENDED ACCESSORIES. Consult the owner's manual for

recommended accessories. The use of improper accessories may cause risk

of injury t o persons.

18. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or

if the cutting tool is accidentally contacted.

19.

CHECK DAMAGED PARTS. Before further use of the tool, a guard or other

part that is damaged should be carefully checked t o determine that

will

operate

properly

and

perform its intended function - check for alignment

of moving parts, binding of moving parts, breakage of parts, mounting, and

any other conditions that may affect its operation. A guard or other part that

is damaged should be properly repaired or replaced.

20.

DIRECTION OF FEED. Feed work into a blade or cutter against the direction

of rotation of the blade or cutter only.

21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't

leave tool until

comes t o a complete stop.

22. When servicing use only identical replacement parts.

23. POLARIZED PLUGS. To reduce the risk of electric shock, this equipment has

a polarized plug (one blade is wider than the other). This plug will fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet, reverse

t h e plug. If

still does not fit, contact a qualified electrician t o install the

proper outlet. Do not change the plug i n any way.

Ampere Rating

Not

More Than

1 2

1 6

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,

outlet, etc.)

sure the voltage supplied is the same as that specified on the

nameplate of the tool. A power source with voltage greater than that specified

for the tool can result in SERIOUS INJURY t o the user - as well as damage t o

the tool. If in doubt, DO NOT PLUG

THE TOOL. Using a power source

with

voltage less than the nameplate rating is harmful t o the motor.

Volts

Total length of cord in feet

1 2 0 V

2 5 f t .

50 ft.

100 ft.

150 f t .

AWG

1 8

1 6

1 4

1 8

1 4

1 6

1 4

Not Recommended