- ページ 5

マーチャンダイザー Avantco 178GDICE49FBのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Avantco 178GDICE49FB 18 ページ。 Ice merchandisers

Temperature Controller Settings

1. To access settings on temperature controller, hold the "Prg/mute" button and "Set" button

down simultaneously until the display flashes with a zero.

2. Push the "up arrow/aux" button until the display shows 22.

3. Press the "Set" button to enter the programming mode of the controller.

4. To save any changes that are made, press and hold the "Prg/mute" button until the set

point temperature shows on the controller display.

5. Use "Up" and "Down" arrows to change values for each option.

6. Press the "Set" button to keep the option.

Fig. 1

Code

Unit of measure of temperature display

Evaporator fan runs during defrost mode

Evaporator fan runs with compressor off

Evaporator fan activation temperature

(Only functions if F0 = 1 or 2)

Service Manual

Ice Merchandisers

Description

Options

0 = °C

1 = °F

0 = Fan runs

1 = Fan does not run

0 = Reference F0 option

1 = Fan always off when compressor off

-5° - 200°

www.AvantcoRefrigeration.com

Default

41°