- ページ 3

マーチャンダイザー Avantco 189BVAC36HCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantco 189BVAC36HC 7 ページ。 Vertical open air merchandisers
Avantco 189BVAC36HC にも：ユーザーマニュアル (10 ページ)

ページを印刷する

Installation

Please read this manual thoroughly prior to equipment set-up, operation, and maintenance.

This unit is intended for use in a temperature-controlled environment less than 75 º F and

55% relative humidity. Malfunction due to improper conditions is not covered under warranty.

Important!!! Please Read Before Installation

• If the unit has recently been transported on its side, please let the unit stand upright for a

minimum of 24 hours before plugging it in.

• Make sure the unit has reached the desired temperature before loading the unit with products.

This unit is meant for keeping cold products cold, not chilling warm products.

• Make sure all accessories are installed (shelves, shelf clips, etc.) before plugging in the unit.

• Do not attempt to remove or repair any component of the unit. Consult an authorized service

technician for servicing / repair.

• Do not stand inside the unit.

• Please read through this manual in its entirety.

• This refrigerator is designed to perform in a temperature-controlled environment less than 75°F

and 55% relative humidity. The unit should be located away from doors, air ducts, and fans that

could disrupt airflow and negatively impact performance.

Cabinet Location Guides

• Install the unit on a strong and leveled surface.

- If the surface is uneven, the unit may be noisy.

- The unit may malfunction if the surface is uneven.

• Install the unit in an indoor, well-ventilated area away from doors, air ducts, and fans.

- For best performance, maintain 6" of clearance on the back of the unit at all times.

- Do not use outdoors. For indoor use only.

- Avoid direct sunlight.

• Avoid installation in a high-humidity and / or dusty area.

- High humidity can cause the unit to rust and may decrease efficiency.

- Dust collected on the condenser coil may cause unit to malfunction.

- Malfunction due to high ambient temperatures, humidity, or improperly maintained

condenser coil will void the warranty.

• Select a location away from heat and moisture-generating equipment.

- High ambient temperatures may cause the compressor to malfunction.

- Malfunction due to high ambient temperatures and humidity will void the warranty.

User Manual

- 3 -