- ページ 12

照明器具 IKEA VAPPEBYのPDF マニュアルをオンラインで閲覧またはダウンロードできます。IKEA VAPPEBY 36 ページ。
IKEA VAPPEBY にも：マニュアル (32 ページ), マニュアル (28 ページ), マニュアル (36 ページ)

Other settings:

Unpair Bluetooth devices

Set up a stereo pair

Enable/Disable the auto-off

function

Factory reset

Press and hold the Bluetooth pairing button (4)

for ≥1.5 s. The speaker will release the Bluetooth

connection to the phone and start searching for

another device to pair with. The LED will change

from steady light to flashing.

You can pair two identical VAPPEBY 20 gen3

speakers to create a stereo experience. In this

configuration, one speaker serves as the left channel

and the other serves as the right channel.

1. Factory reset both speakers

2. Both speakers automatically enter Bluetooth

pairing mode (LED quick flash).

3. Press twice on the Bluetooth button (4) on one

of the speakers (master) to initiate stereo pairing

(LED slow flash).

4. Successful pairing is confirmed by a system sound.

5. Pair the master speaker to your source device.

To disconnect a stereo pair, factory reset both

speakers.

Move the switch (2) to position "20" to enable auto-

off. The speaker will turn off automatically after 20

minutes if no music is played. Move the switch (2) to

position "∞" to disable the auto-off function.

Press and hold the volume knob (5) for 5 seconds. A

confirmation sound will be played.