- ページ 8

キッチン家電 Avantco Equipment 177CHSME24AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantco Equipment 177CHSME24A 9 ページ。 Electric cheese melters

User Manual

Wall-Mounting Installation Instructions

WARNING:

The Cheese Melter must be installed in accordance with:

1. State and local codes.

2. National Electrical Code, ANSI/NFPA-70 (latest edition).

To reduce the risk of fire, the appliance is to be installed in non-combustible surroundings only, with no combustible

material within 18" of the sides, front, or rear of the appliance or within 40" above the appliance.

Parts Included:

Wall Brackets: (2)pcs

• Each wall bracket must be installed

with (4)¼" lag screws (not provided).

Installation Procedure:

1. We recommend that the unit wall-mount must be

installed by a qualified professional. Installation by

unqualified personnel may void the unit warranty.

2. The wall brackets must be fastened to a wall

with studs or a concrete wall which can hold

the machine.

3. Determine the height for the unit installation.

Mark the wall at the desired height.

4. Mark the locations for 8pcs lag screws.

Drill as necessary.

5. We recommend using ¼" thick and 2½" long

lag screws.

6. The types of the lag screws are depended

according the material and structure of the wall.

A qualified professional is necessary to make

decision.

7. Center and level the wall brackets.

8. Insert (4) lag screws through each wall bracket and

fit it in the wall.

9. Tighten each lag screw securely.

10. Lift the machine and hook the hooking key holes

on the back of the unit onto the hanging hook

(which are welded on the top of the wall brackets).

11. Check and test to make sure the unit hooking

key holes and hook are secure by applying slight

pressure to test.

NOTE: Wall-mounting brackets have a maximum

weight capacity of 30 lb. (excluding the weight

of the machine).