- ページ 2

キッチン家電 Avantco Equipment 177SL713AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Avantco Equipment 177SL713A 16 ページ。 Meat slicer
Avantco Equipment 177SL713A にも：ユーザーマニュアル (16 ページ)

ページを印刷する

User Manual

Unpacking:

Unpack the product and check for any damage incurred during transit. This should be reported to the responsible

carrier, railway or postal authority, and a request for a damage report should be made.

These instructions must be followed for us to guarantee our full support of your claim for

protecting against loss from concealed damage. The form for filing such a claim will be

provided by the carrier.

General Installation And Operation

Instructions:

The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the

highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and

reliable operation and use. These units are suitable for slicing frozen meats.

1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.

The supporting table should be stable and at the correct working height. The work surface should be in a dry location

and preferably away from heavy traffic areas.

2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-

structions on page 3 of this manual.

3. Set the thickness of slice required using the control knob adjacent to the on/off switch.

4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place

the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position

now on top of the meat to be sliced.

5. The unit can be operated in either MANUAL or AUTO feed modes.

5.1 MANUAL MODE

Ensure the control lever H in diagram 1 is position A. This handle disengages

auto feed function.

Switch on the blade motor only and using the handle on the food pusher, push

the carriage back and forth to

begin cutting the food.

5.1 AUTO FEED MODE

Ensure the control lever H in diagram 1 is in position B. This handle engages

the auto feed function.

Switch on the blade motor first and then the auto feed motor. The unit will now

automatically cut the meat oaded.

6. After you are finished cutting, turn off machine and collect the product slices in the exit area.

Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot

and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially

designed for the institutional environment with its super concentrated, high active, high

sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.

Diagram 1