- ページ 5

電動工具 Makita 4300BAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Makita 4300BA 13 ページ。
Makita 4300BA にも：取扱説明書 (12 ページ)

ページを印刷する

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before carrying out any work on the tool.

Installing or removing saw blade

005921

CAUTION:

Always clean out all chips or foreign matter

•

adhering to the blade and/or blade holder. Failure

to do so may cause insufficient tightening of the

blade, resulting in serious personal injury.

Do not touch the blade or the workpiece

•

immediately after operation as they may be

extremely hot and could cause burn injury.

Always secure the blade firmly. Insufficient

•

tightening of the blade may cause blade breakage

or serious personal injury.

First, use the hex

wrench to remove the bolt that

secures the blade clamp to the blade holder shaft.

With the blade teeth facing forward, place the shank of

the blade over the flat side of the blade holder shaft.

Then place the blade clamp over the other side of the

blade shank. Secure this assembly together with the bolt.

Make sure that the bolt passes through the larger hole in

the blade shank.

1. Blade holder

2. Blade set

3. Bolt

4. Hex wrench

5. Blade shank

6. Blade

Installing the universal shank jig saw blade

6.35mm

005922

If the universal blade clamp is used, you can use blades

of other makes which have a universal shank like the one

shown in the figure, with a blade width of 6.35 mm.

Remove the factory installed blade clamp with the hex.

wrench. Then loosen the bolt on the universal blade

clamp, and fit the universal shank blade onto the spring

pin inside the universal blade clamp.

005923

Now attach the universal blade clamp to the blade holder

(blade in place) so that the spring pin fits into the hole in

the blade holder. Tighten the bolt securely with the hex.

wrench.

005924

Adjusting roller

005925

1. Universal blade

clamp

2. Universal shank

blade

3. Bolt

4. Spring pin

5. Universal shank

blade

1. Blade holder

2. Hole

3. Blade

1. Bolt

2. Retainer

3. Roller

4. Blade