- ページ 7

マーチャンダイザー FRIGOGLASS Flex 35 HCのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。FRIGOGLASS Flex 35 HC 13 ページ。

ENG

Energy saving tips:

For energy saving and ICM's better performance:

•

Load your ICM at night-time so that the drinks are cold once you get there in the morning.

•

Store your back-up stock in a cool and/or dark place so that when reloaded, the ICM will need

much less time to cool them down.

•

Wipe moisture off the products you place in the ICM.

•

Avoid opening the door for long periods of time.

4. Care & cleaning

It is important to clean the merchandiser twice a year. In order to avoid mould formation, odours, etc.

product compartments must also be thoroughly cleaned. The interior of the ICM should be cleaned

with a mildly soapy cloth and the glass surface using a window-cleaning agent.

Do not operate the appliance while any of the cover sheets and guards is

open.

Prior to any cleaning (inside or outside the device) procedure, unplug the

ICM! Remove the plug and make sure that the operator can check from

any of the points which he has access to, that the cable is unplugged.

Never use a water hose or high pressure jet to clean the cooler.



In case the merchandiser is placed in very dusty and/or greasy

environment, the regular cleaning of the condenser by an authorized

technician is mandatory.



Keep the cooler in a stable position during cleaning, do not step on or

lean over the cooler.



Do not clean with sharp objects, flammable or corrosive liquids or

sprays.

ALL ACCESS TO THE COOLING SYSTEM AND ELECTRICAL PARTS

(CHANGING LIGHTING OR REFRIGERATION DECK) MUST BE

PERFORMED BY AUTHORIZED SERVICE PERSONNEL ONLY.