- ページ 5

フラッドライト Garage Tek GT8503EのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Garage Tek GT8503E 5 ページ。 Security floodlight solar powered

ページを印刷する
THE LIGHT IS SUPPLIED WITH A 10 WATT BULB. IT IS RATED TO SUPPLY 150 ACTIVATIONS
OF 1 MINUTE DURATION ON A FULLY CHARGED BATTERY DURING AN OVERNIGHT PERIOD.
IF YOU DESIRE A BRIGHTER LIGHT, YOU CAN SUBSTITUTE THE 10 WATT BULB WITH UP TO A
30 WATT, 6 VOLT BULB. THIS WILL REDUCE THE ACTIVATIONS TO 60 OF 1 MINUTE DURATIONS
ON A FULLY CHARGED BATTERY DURING AN OVERNIGHT PERIOD.
TROUBLE SHOOTING GUIDE
PROBLEM
Light will not switch on when there is movement in the detection
area
Light switches on during the day
Light switches on for no apparent reason
Light quickly flashes on and off
Light is not as bright as normal
PG 5
GT8503E SECURITY FLOODLIGHT
Insure that the power switch on the main body has been turned to AUTO
Ensure that the motion sensor has been positioned to face oncoming movement
Ensure that the battery has been fully charged in direct sunlight for 3 sunny days
Check to see that the solar cell charge panel is facing south so that it receives direct sunlight
for most of the day, enabling the battery to fully charge
Check to see that the LUX control has not been set too far towards the darkness (moon
symbol) position. Setting the LUX control too far towards the darkness symbol will cause the
light to turn on only in complete darkness.
Check to see if the solar panel is not near night time light source, such as street lights.
The halogen bulb may not be working and may need to be replaced.
The LUX control may be set too far towards the daylight (sun symbol) position
Reposition the motion sensor
The SENS control may be set too far towards the (+) position.
Moving trees, traffic, pets or birds may be getting in the area of detection. This may be
unavoidable, however the sensor could be redirected to a height where this is less likely to
occur.
If there are reflective objects in the detection area such as windows, water or white walls, you
may need to redirect or reposition the motion sensor.
Test the motion sensor by covering it completely with cardboard and waiting several minutes
to make sure it does not detect motion. If the light still switches on, contact GarageTek.
The battery charge may be low. Turn the power switch to the OFF position and charge the
battery for 3 sunny days, ensuring the solar cell charge panel has been placed in direct
sunlight.
Move the LUX control more towards the daylight (sun symbol) position.
The battery charge may be low. Turn the power switch to the OFF position and charge the
battery for 3 sunny days, ensuring the solar cell charge panel has been placed in direct
sunlight.
The halogen bulb may need to be replaced.
QUESTIONS ???? CALL 1-866 664 2724
SOLAR POWERED
POSSIBLE SOLUTIONS
REV 2, 12/11