- ページ 20

ネットワーク・ハードウェア CORNING CentrixのPDF ジャンパ配線をオンラインで閲覧またはダウンロードできます。CORNING Centrix 20 ページ。 System splitter/cwdm cassette installation
CORNING Centrix にも: 取扱説明書 (8 ページ), クイック・スタート・マニュアル (2 ページ)

CORNING Centrix ジャンパ配線

6. Connector Care and Cleaning

WARNING: Isopropyl alcohol is flammable with a flashpoint at 54ºF.
It can cause irritation to eyes on contact. In case of contact, flush
eyes with water for at least 15 minutes. Inhalation of vapors irritates
the respiratory tract. Exposure to high concentrations has a narcotic
effect, producing symptoms of dizziness, drowsiness, headache,
staggering, unconsciousness and possibly death.
• Always keep dust caps on connectors and adapters when not in use.
• Ensure dust caps are clean before reuse.
• Use optical cleaning materials as standardized by your company.
• Clean the connector before every mating, especially for test equipment patch
cords (jumpers.)
• A minimum level of cleaning is listed below. Local procedures may require
more rigorous cleaning methods.
Step 1: Remove plugs from the connector adapter.
Step 2: Wipe the connector ferrule twice with a lint-free wiping material
moistened with isopropyl alcohol. Then wipe across the end of the
ferrule.
Step 3: Repeat previous step with a dry wipe.
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features
and specifications of Corning Optical Communications products without prior notification. A complete
listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/
trademarks. All other trademarks are the properties of their respective owners. Corning Optical
Communications is ISO 9001 certified. © 2013, 2017 Corning Optical Communications. All rights
reserved.
STANDARD RECOMMENDED PROCEDURE 003-960 | ISSUE 4 | OCTObER 2017 | PAGE 18 OF 18